Leatt STX RR Neck Brace

Every once in a while I see an ADV rider wearing a LEATT brace but not many.  I have thought about adding this to our gear but many of the jackets out there are not LEATT friendly unless you move up into the real technical gear which for us seems to be just a bit over kill….suits like the KLIM ADV rally, Badlands Pro, Rukka gear etc.  This is not to say we all shouldn’t take the advise of racers and protect our necks but I was wondering….any ADV rider out there reading this post have an opinion?  To be ATGATT do we or should we be using this?

Source:  Motorcycle.com

By Troy Siahaan October 7, 2013
Photos by: Troy Siahaan and Andy Vu

Helmets, leathers, gloves, boots, back protector, chest protector, air bags. When it comes to road racing, millions of dollars are spent to keep the rider covered in some sort of protective equipment, all in an effort to keep you as safe as possible when pushing to the max. Through it all, however, there’s still one incredibly important (and sensitive!) part of the body exposed to the elements — your neck.

Dr. Chris Leatt, an innovator in the field of body armor and restraints, and the founder of the company which bears his name, has been designing neck restraints since 2001, when he witnessed the death of a fellow rider. Incorporating Alternative Load Path Technology (ALPT), the theory behind the braces is to prevent the neck from hyperextending, hyperflexing, laterally hyperextending and hypertranslating. Basically, to stop it from bending in ways it shouldn’t during an impact.

Leatt STX RR Neck Brace

The demands of a road racer varies greatly from an off-road rider. Leatt believes the $549.00 STX RR brace finally meets those demands.

When the helmet makes contact with the restraint, the impact load is then dispersed through the brace and onto less critical areas of your body, thereby reducing a potentially catastrophic neck injury to simply a painful and less threatening one. That said, it can’t be stressed enough that no amount of safety gear, including the Leatt brace, is guaranteed to prevent death or serious injury.

What’s behind a neck brace?

Leatt’s early braces were meant for an off-road environment, as a rider’s upper body is generally upright and the rider’s head maintains the same general position. For the street crowd, however, this isn’t the case. Especially in a road racing environment, the upper body is very dynamic, with the head changing position numerous times during a lap as the rider is tucked in a straight or hanging off for a turn. Until now the current crop of Leatt braces wouldn’t allow road racers the full range of head motion they needed, especially in a tuck.

Leatt STX Road Review

Leatt believes it has solved this issue with the STX RR, the first neck brace designed specifically for road-race applications. According to Phil Davy, International Marketing Manager for Leatt, the primary fault of the standard STX Road brace was its height. In order to be effective, the brace must make contact with the rider’s helmet before it’s too late. To do this, the standard brace sits high on the shoulders, ready to accept an impact. In road race applications this limits the racer’s ability to move their head backwards, forwards or side to side.

Leatt STX Road and STX RR

Comparing the STX Road (left) to the STX RR brace, notice the side profile of the RR is much flatter in comparison to the Road. Note also the overall slimmer profile, rotating rear wings and hinged front winglets, all features you won’t find on the standard Road model.

The solution, then, was to make the RR sit lower, closer to the shoulders, by reducing the contour of the sides. This allows the head and neck more freedom of movement while cornering and in a tuck. However, this decision isn’t without its consequences. “By doing this, we reduced the effectiveness of the brace by 30% compared to the standard brace,” Davy says. “But there wasn’t another option.” Spacers snap into the side and back plates to bring the brace closer to the helmet for different size riders. The goal is to have the rear of the helmet slightly contacting the brace when in a full tuck.

Because the RR is meant for racing applications and because of its reduced effectiveness compared to other iterations of the brace, carbon fiber construction was used to keep weight to a minimal 1.55 pounds without sacrificing strength. Davy says the use of other materials wasn’t even a consideration and is the main reason for the lofty $549.00 price tag.

The STX RR, like its STX Road counterpart, includes front winglets to keep it aligned correctly on the body. However, the RR’s flap is hinged, allowing the rider to reach a full tuck without compromising brace position. Unlike the off-road versions of the STX brace, with a single spine down the back, the RR uses twin, swiveling, scapula wings, adjustable with an allen key. The swiveling function is designed to allow the wings to fit with aero humps and many body shapes. Degree marks on the wings let the user tailor them around the aero hump, and a simple latch system allows the wings to move fore or aft to accommodate riders of different sizes and shapes.

Leatt STX RR Adjustment

Marks on the rear wings allow you to fit them precisely around the contour of an aero hump.

In an emergency situation, two quick-turn screws allow medical personnel to quickly slide the brace apart for removal without interfering with the rider’s head or neck. “When designing the brace, we made sure the gap for the screws was wide enough to use coins or other flat objects to turn them,” Davy says. “We know most people don’t carry a flathead screwdriver wherever they go.” The STX RR is CE-certified and Leatt claims it fits riders ranging from 140 to 225 pounds.

The Answer We’ve Been Waiting For?

Sheridan Morais, a native South African and national Superbike champion currently racing in the World Supersport championship, was tapped by fellow South African Leatt to help develop the RR. His advice, along with those of many local and international racers like current MotoGP CRT standout, Aleix Espargaro, helped ensure a wide-ranging and accommodating fit.

According to Davy, the test unit we tested was one of only 10 production-quality prototypes in the world. Of those 10, only five were in the U.S. Davy admitted that, despite these units being production-ready, ongoing testing was further being conducted to refine the RR to meet the tastes of road racers.

Leatt STX RR Action

The lower side profile of the STX RR compared to other Leatt braces meant side-to-side head movement isn’t an issue.

Putting it on is as easy as slipping it over your head. Proper care should be taken to make sure the scapula wings properly fit around the aero hump and are adjusted in a position to let the front winglets rest comfortably on the sternum. Once correctly fitted, the first thing I noticed was its weight, or lack thereof. The RR practically disappears when you wear it. Leatt says the brace is secure once on, but optional straps that connect the rear wings to the front winglets ensure minimal movement at speed.

For my average body stature I had to remove the rubber padding in the back and side plates for the most comfortable fit. During my first outing with the brace, at our Exotic European Literbike Shootout, the only time I noticed the brace intruding was in a full tuck on the straight sections of the track. The back of my helmet would make contact with the brace earlier than preferred, inhibiting my forward view slightly. I learned to ride around it, and because it didn’t restrict my range of movement turning from side-to-side or looking through a turn, I continued wearing it throughout the day.

Leatt stresses the STX RR is primarily meant for sportbike applications, however, I decided to try it when I participated in the most dangerous race in the country: the Pikes Peak International Hill Climb. Because I would be riding a Zero FX, which more closely resembles a supermoto than a sportbike and requires a different riding style, the STX RR was entirely unwearable. The FX, and other supermotos like it, demands a rider tuck much tighter than a sportbike. And even though my head wasn’t impeded while turning, my neck was severely restricted when trying to tuck, to the point I couldn’t see ahead. It was more a detriment than a benefit, forcing me to leave it off for the rest of the event.

Leatt STX RR Action 02

Even with the spacers removed, I found the STX RR brace didn’t allow my head to tilt as far back as desired when in a full tuck. Different body shapes and sizes may vary.

I don’t think you’ll find anyone against the advancement of rider safety in this sport, especially when it comes to the neck and spine. In this regard Dr. Leatt and his team deserve praise for their commitment to make motorcycling safer. The STX RR brace is a step in the right direction for the road racing community, and might even work for you depending on your riding style.

Personally, I’d like more room to prop my head up fully in a tuck position. As mentioned before, research and development is ongoing at Leatt, and once the RR’s fit is perfected it will become a permanent fixture in my riding arsenal.

For more information, or to place an order on an STX RR, visit www.leatt-brace.com.

Author: advgrrl

Avid ADV rider! This Blog is all about the adventure in adventure riding. Researching new bikes, routes, accessories, learning about other riders and hopefully a great place for others to comment and explore with me. PLUS, up and down's, wildlife, my dogs, my life!

2 thoughts on “Leatt STX RR Neck Brace”

  1. Any protective gear won’t hurt, of course, but it comes down to how far you want to go. You **could** add a roll cage to your car which would make it virtually indestructible if you slid off the road, hit a tree and tumbled into a ravine, for example. I used to wear an open face helmet when riding on 30mph or lower roads in the city because for me the extra visibly offset the risk to my chin – until I got my Icon Variant which has the same field of vision as the open face in a full face helmet. In hot summer weather I often wear a Fox Titan protective jacket with a motocross jersey over top – I’d say it offers about 80-90% of the protection of my full jacket but breathes nearly as well as wearing only a t-shirt.

    However, for neck braces, different manufacturers have different designs which may work with standard gear so it might be worthwhile to try on a few different types/models to see if you can find something that works for you. Any type will limit how far your neck will bend, twist or compress on impact compared to not wearing one at all.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: